Parallax Propeller Book - Project Boards

Most microcontroller applications involve reading inputs, making decisions, and controlling outputs.

To follow the Projects in this e-book you have several options depending on what hardware is available for you to use:

  1. In the past you could have constructed your own circuits if you used Propeller Educational Kit (PEK) Product ID: 32305
    Propeller Educational Kit (PEK)
    Propeller Educational Kit

    Unfortunately as of October 2018 this kit is no longer available from PARALLAX, but there are still some available on e-bay.
    If you can no longer find one, you can still build your own circuits by following the Kit manual that is available FREE for download here:
    Propeller Education Kit Labs Fundamentals Text
    link also exists from this page:
    https://www.parallax.com/package/propeller-education-kit-fundamentals-text-and-code/

    The Propeller Education Kit Fundamentals text in pdf and code supported the Propeller Educational Kit (discontinued), a breadboard-based kit for programming the original Propeller P8X32A multicore microcontroller in Spin.  Though the PEK is discontinued, the P8X32A DIP chip and the Propeller FLiP module (descendant of the PropStick USB) are both available, and therefore this book still remains useful for learning Spin programming.

  2. You can use the Propeller Activity Board (PAB) Product ID: 32912
    Propeller Activity Board (PAB)
    Propeller Activity Board

    Many of the circuits such as Two amber LEDs, ADC and SD card holder are already built in. Also a small Breadboard is installed on this Board so simple circuits can be quickly and conveniently constructed.

  3. You can use the Propeller Quick-Start Board (QSB) Product ID: 40000
    Propeller QuckStart Board (QSB)
    Propeller QuckStart Board

    Eight blue LEDs and eight Touch Pad switches are already built in.
    This board is being discontinued as of August 2023


  4. Also in the past you could have used the Propeller Professional Development Board (PRO) Product ID: 32111
    Propeller Professional Development Board (QSB)
    Propeller Professional Development Board

    Where you still had to construct your own circuits, but almost all the necessary components for many Projects are already present on the PRO board, so you only need to connect them together with breadboard jumper wires. Unfortunately the PRO has been discontinued by PARALLAX and is no longer available. However both new and used PRO boards can be still found for sale on the Internet.

  5. You can use the Propeller Board of Education (PBE) Product ID: 32900

    Propeller Board of Education (PBE)
    Propeller Board of Education
    A built-in set of peripherals makes it ready to support an amazing array of projects, prototypes, hands-on activities, and kits.
    The Propeller Board of Education is ideal for learning the basics of electronics, programming and robotics. It also simplifies advanced applications that require RF-linked communication, audio/visual peripherals, and gigs of SD memory.
    Also a small Breadboard is installed on this Board so simple circuits can be quickly and conveniently constructed.
    This board has been discontinued by Parallax, but few of the are still available here:
    http://www.ic0nstrux.com/Propeller-Board-Of-Education

  6. You can use the Propeller Microcontroller Module (FliP) Product ID: 32123

    Propeller Microcontroller Module (FLiP)
    Propeller Microcontroller Module


    The breadboard-friendly Propeller FLiP microcontroller module available since 2020 packs a lot of features into a small, easy-to-use form-factor.
    With on-board USB for both communication and power, on-board LEDs, a high-performance 3.3V switching regulator, USB and reverse-polarity protection, and informative, easy-to-read labelling, the Propeller FLiP module will quickly become your go-to microcontroller for all of your inventions!
    Pin information is printed right on top of the module, which makes learning fun and prototyping incredibly fast.
    The Propeller FLiP has roughly the same pin-out as previous 40-pin DIP Propeller modules.
    This design provides improved damage-minimization if inserted in reverse.
    When coupled with exceptional power management, the FLiP is a robust module ideally suited for classrooms, projects and finished products alike.


Each e-book Project has a link to the associated circuit schematics.

To fully understand the program functionality you should review the associated circuit schematics and understand how it works electronically.

Under Construction
Currently this page is still under development, so please check back periodically for new links to pages as we add them to this list.

Links to related Webpages

Click the link in the list below to navigate to a detailed webpage about the listed subject.


Parallax Propeller Book - Table fo Content